GD V2 – Part 14

Written by Balang Project

Once again waiting for parts to carry on with the bottom end, so I decided to prep the intake with the new parts. The main change here is the new injectors but I also cleaned up the intake and the various hoses, fuel lines and wiring.

Out with the old and in with the new; Nismo 740cc injectors.

I also removed the fuel pressure regulator and in its place fitted an AN-6 adaptor for the fuel rail as I’ll be running an adjustable fuel pressure regulator. I also replaced the stupid Phillips head screws for some hex flanged types.

Leave a Reply

Your email address will not be published. Required fields are marked *